The Atten MS-900 4 in 1 rework station includes a hot air station, a soldering station, a laboratory power supply, electronic tweezers, and a rack kit for transport and installation.
HOT AIR SYSTEM
A smart cooling system is adopted. It can automatically delay the air supply when the device is turned off, which can greatly extend the life of the heater core and holder. A Sprial heater core is used, which can help extend the life. The hot air gun holder has been redesigned to make the air more evenly. It is not easy to damage, which is convenient for maintenance, storage, and transportation.
SPECIFICATIONS
● Power: 550W, Fan 25W
● Output Voltage: Input
● Temperature Range: 150 - 500°C
● Standby Time: NA
● Volume Flow (max): 23 L/min
● Noise: <52dB (A)
● Temperature for Calibration: -50 ~ 50℃
● Password Lock: Available
● Temperature Stability: 5°C
● Earth Resistance: 2 Ohm
● Earth Potential: < 2mV
SOLDERING SYSTEM
The soldering station uses a split heater core material that provides thermal conduction and an extremely high-temperature return rate. It only takes 10 seconds from room temperature to 350 when the machine is started up to 350. The front sensor is used to ensure high-temperature control accuracy and good temperature stability. The soldering iron handle holder is light and comfortable.
SPECIFICATIONS
● Power: 130W
● Output Voltage: 24V DC
● Temperature Range: 150 - 500°C
● Standby Time: 1 - 120 Minutes
● Volume Flow (max): NA
● Noise: NA
● Temperature for Calibration: -50 ~ 50℃
● Password Lock: Available
● Temperature Stability: 2°C
● Earth Resistance: 2 Ohm
● Earth Potential: < 2mV
DESOLDERING SYSTEM
The desoldering station heater core uses a 24 VDC low voltage power supply and the safe and reliable isolation output of the main power transformer. Built-in vacuum pump with strong suction power.
SPECIFICATIONS
● Power: 150W / Vacuum Pump 15W
● Output Voltage: 24V DC
● Temperature Range: 150 - 500°C
● Standby Time: 1 - 120 Minutes
● Volume Flow (max): NA
● Noise: NA
● Temperature for Calibration: -50 ~ 50℃
● Password Lock: Available
● Temperature Stability: 2°C
● Earth Resistance: 2 Ohm
● Earth Potential: < 2mV
ELECTRONIC TWEEZERS
The heating core of the electronic tweezers uses a 12 VDC low voltage supply and the safe and reliable isolation output of the main transformer. The front sensor is used to ensure high-temperature control accuracy and good temperature stability.
SPECIFICATIONS
● Power: 100W
● Output Voltage: 12V DC
● Temperature Range: 150 - 500°C
● Standby Time: 1 - 120 Minutes
● Volume Flow (max): NA
● Noise: NA
● Temperature for Calibration: -50 ~ 50℃
● Password Lock: Available
● Temperature Stability: 2°C
● Earth Resistance: 2 Ohm
● Earth Potential: < 2mV
